
APC-3x93P_R (SBC-7106) User Manual
6. RS-232:
(Switch),COM1 jumper setting, it provides selectable RS232 or RS422 or RS485 serial
signal output.
ON:
Pin1, Pin2, Pin3, Pin4, Pin5
OFF:
Pin1, Pin2, Pin3, Pin4, Pin5
OFF:
Pin1, Pin2, Pin3, Pin4, Pin5
7. RS-422:
(Switch),COM1 setting, it provides selectable RS232 or RS422 or RS485 serial signal
output.
OFF: Pin1, Pin2, Pin3, Pin4,
Pin5
ON: Pin1, Pin2, Pin3, Pin4,
Pin5
ON: Pin1, Pin2, Pin3, Pin4,
Pin5
Note: Must keep the setting with BIOS setting.
8. COM1:
(Type DB9),Rear serial port, standard DB9 Male serial port is provided to make a direct
connection to serial devices. COM1 port is controlled by pins No.1~6 of JP1,select
output Signal RI or 5V or 12V, For details, please refer to description of JP1 and S_232
and S_422 setting.
Comentarios a estos manuales