Aplex-technology APC-3591A Manual de usuario descargar pdf (Pagina 22)

APC-3X91A User Manual

Note:

Make sure that the voltage of power supply is DC(12±5%)V before power on, or

it may cause boot up failure and even system damage.

23. SATA1/2: (SATA 7P),SATA1,SATA2 SATA Connectors, Two SATA connectors are

provided, with transfer speed up to 3.0Gb/s.

24. SATA_P1: (2.5mm Pitch 1x2 box Pin Header),an onboard 5V output

connector is reserved to provide power for IDE/SATA devices.

Pin#

Signal

Name

+DC5V

Ground

Note:

Output current of the connector must not be above 1A.

25. JP_104P: (2.0mm Pitch 1X3 Pin Header) PC104+ port voltage selection jumper,

select voltage for PCI-104 Plus device. The default for this jumper is “all open”,

meaning the user must select the voltage to be used.

JVCCIO

PC104+ VCCIO

Voltage

all Open

Default

CLOSE 1-2

+3.3V PCI Card

CLOSE 2-3

+5V PCI Card

26. PC104+: (4x30 Pin), PC104 plus connector, it conforms to standard PC104+

specification. Can expand support four PCI devices.

27. H1/H2/H3/H4: CPU FAN SCREW HOLES, Four screw holes for fixed CPU Cooler

assemble.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 76 77

Sin comentarios

Aplex-technology APC-3591A Manual de usuario Pagina 22