Aplex-technology APC-3228A Manual de usuario descargar pdf (Pagina 26)

APC-3228A User Manual

Pin3: USB01 OC-, “USB01_OC-“ Signal.

Pin5: USB23 OC-,“USB23_OC-“ Signal.

Pin7+Ground: RESET Button, They are used to connect reset button. The two pins

are disconnected under normal condition. You may short them temporarily to

realize system reset.

Pin6+Pin8: POWER on/off Button, They are used to connect power switch button.

The two pins are disconnected under normal condition. You may short them

temporarily to realize system startup & shutdown or awaken the system from

sleep state.

Pin9+Pin10: BUZZER, They are used to connect an external buzzer.

Pin11~Pin18: GPIO IN/GPIO OUT, General-purpose input/output port, it provides a

group of self-programming interfaces to customers for flexible use.

Pin19~Pin24: PS2 KB/MS, PS/2 keyboard and mouse port, the port can be connected

PS/2 keyboard and mouse via a dedicated cable for direct used.

Pin25~40: USB0/USB1/USB2/USB3, Front USB connector, it provides 4 USB ports

via

a dedicated USB cable, speed up to 480Mb/s.

Note:

When connecting LEDs and buzzer and GPIO and USB, pay special attention to the

signal polarity. Make sure that the connector pins have a one-to-one correspondence

with chassis wiring, or it may cause boot up failure.

31. JCF/JSATA(option):

(2.0mm Pitch 3x4 Pin Header), it provides selectable IDE_CF1 or SATA4 signal output

control.

Functio

Jumper setting

Default

All open

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 95 96

Sin comentarios

Aplex-technology APC-3228A Manual de usuario Pagina 26